1. Wooden chair upholstery - where do I begin?

If we decide to renew the chair, we will take off the upholstery after unscrewing the back and seat. We should be careful not to damage it as it could serve as a reference to cut the new fabric. However, be sure to install a light source for this, as the new foam might be slightly denser than the one used in the "factory," and then we'll be out of fabric. If the wood filling used to create the chair seat isn't damaged or worn out, then we can continue to apply foam and other materials.

2. How do you fasten belts and springs for upholstery?

Sometimes, when they're damaged and are not performing their best, we need to replace the upholstery belts. They must be attached to a wood frame with a tacker or nail. Their number depends on the width of the backrest and seat: most often 2-3 are mounted vertically and the exact amount horizontally in the case of a backrest. In the case of the seat, it is possible to boost its strength by using additional belts. Make sure to interlace the belts in pairs - crosswise, and they will give us the best level in the "working" of the seat. It is crucial to ensure that before attaching the belt to the frame, we need to ensure that it is correctly tensioned.

3. How to cut and choose the foam?

Foam comes next. At the shop, you'll see different marks. They will inform you about the rigidity and the density. It is also important to be aware of how thick the foam is. If this is the case, it is imperative to make a decision based on intuition, as the type of foam that is the most suitable in the particular case is based on the furniture. Once inside the chair, the foam can be cut straight away or cut using a sharp kitchen knife. Before applying it to the furniture, we require a nonwoven cloth over the foam and lining the interior of the furniture.

4. How do you sew the seat cover?

The final element is the placement of the fabric. After we have removed the upholstery, we will get an idea about the appearance of the fabric. To accomplish this, it is possible to use the sewing machine and correctly stitch and place all the elements needed onto the furniture. If you are not gifted with the ability to tailor the furniture, it's worth delegating the job to an upholsterer who can perform the job in a better way.

In case, if you are looking for the best sofa upholstery service in Dubai, then you have landed on the right page. Sofa Palace provides one of the best sofa upholstery in Dubai and has immense experience in handling other upholstery works as well such as chair upholstery, sofa reupholstery etc. Contact us now and deal with the best upholsters in Dubai.